What's new
  • This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies. Learn more.

Nokia 216 rm-1187 usb pinouts

A2ZMobile

Junior Member
Registered ✔
Joined
Jan 16, 2017
Messages
31
Likes
10
Points
8
Age
18
#1


Code:
Dead Mode is Selected

Waiting for USB device...
1. Phone should be Off!
2. Battery must be charged and inserted! ( if not used external power )
- > If phone can't switch to BL - use battery or flash from Local mode!

--- Insert USB cable now! ---
Wait for phone...
Phone found! [ 34 ]
Sync...
Sync Ok, read regs...
Inital regs read done
Boot Info :
BB_CPU_ID : 6260
BB_CPU_HW : CB00
BB_CPU_SW : 0000
BB_CPU_SB : 8000
BB_CPU_NM : [MediaTek] MT6260_S0001
BB_CPU_SN : 435648DC34A0E3134A8896DEBCE93484
BROM Protocol Version : 05
BROM Status : 0000
Comm Status : 0000
EXBL Status : Alive [ USB Load Active ]
Switch to BL done
BL Version : 01
Setting...
Setting done , result code 0x8000
Project ID : SUEZ.11.00.11.p1
BROM/BL stage done
Seek and prepare DownloadAgent
DownloadAgent matching HW Found!
DA verify and select done
Sending DA to target ...
DA_eMP_Suez.fg
DA_VERIFY : 00
DA_JUMP : 00040000
DA_AUTH : Passed!
DA_INFO : 0xC0 , Ver : 3.2 , BBID : 0x8B
DA_CSTAT : 0x5A
SOC_VERIFY : 0xC1
BOOT_STYLE : SF_FLASH_BOOT
NOR Flash IC initialized
[0] : FLASH_VEN : 0x00F8 , [WINBOND] W25Q128FW
[0] : FLASH_DIE : 00EF 0060 0018 0000
[0] : FLASH_LEN : 0x01000000
FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000

Executing FFS FORMAT now...
FAT_RANGE : 0x00CE0000-0x00FF3FFF , LEN : 0x00314000
DA_RET : DA_IN_PROGRESS
DA_RET : FORMAT_DONE

Elapsed: 00:01:01
Connect phone on selected interface...