INSTALLATION PROCEDURE: This process is dangerous and might be permanent. So Proceed at your own risk. Follow below to install KitKat on QMobile Noir i9. QMobile-i9_140808_ForFlashtoolFromReadBack_140924-111454.7z MAKE A BACKUP OF YOUR STOCK ROM with MTK Droid Tools first…. MUST Download all the four files from the above given links on your Computer with Windows 7. Extract the Drivers-MT65xxPreloader.zip file onto desktop or someplace convenient to access. Double click on InstallDriver.exe to install the drivers for QMobile Noir i9. When the driver Installation is completed, Extract QMobile-i9_140808_ForFlashtoolFromReadBack_140924-111454.7z onto desktop Place the MT6582_Android_scatter.txt file in extracted QMobile-i9_140808_ForFlashtoolFromReadBack_140924-111454 folder. Now Extract SP FLASH TOOL.zip onto desktop. Open SP FLASH TOOL folder and then open flash_tool.exe. Once Flash Tool is opened click on Scatter-loading button on the right side of the flash tool. Now browse to QMobile-i9_140808_ForFlashtoolFromReadBack_140924-111454 folder which we extract earlier onto desktop. Then select MT6582_Android_scatter.txt and click Open After doing above step properly, click on the Download button WITHOUT TOUCHING ANYTHING ELSE. After clicking the Download button, REMOVE battery from your QMobile Noir i9 and Connect it with PC. (Remember: Connect it without battery). If drivers are properly installed, the procedure will start immediately. It will take about 5-6 minutes to complete. Be patient. DO NOT DISCONNECT THE DEVICE AT ANY COST. When the procedure is complete, there will be a Green TICK indicating the completion of the flashing procedure. Now, DISCONNECT your QMobile Noir i9 and INSERT BATTERY inside and Power it up. The first boot will take about 3-5 mintues so be patient. Enjoy KitKat on your QMobile Noir i9. The rooting procedure of KitKat on your QMobile Noir i9 will be provided later. FOR THOSE OF YOU FACING “PMT CHANGED, ROM MUST BE DOWNLOADED ERROR”: After following upto / doing Step # 15, please follow the steps below. Click on the Format tab. Then click on Start WITHOUT TOUCHING ANYTHING ELSE. Now Remove battery from you device and Connect it to PC WITHOUT battery. The process will start immediately and it will take some seconds. After completion, there will be a Green Tick Confirming the process completion. Close that Tick and GO BACK to Download Tab. Now Disconnect the device but do not put battery inside and follow the rest of the procedure from above and continue from Step # 16. Thanks.