X200 QMobile X200 Flash File


Junior Member
Registered ✔
Model: Q MOBILE X200



Download :
SP Flash Tool v5.1352.01
Install ROM :

- Unpack FlashTools, and Click on Flash_tool.exe
- Select "scatter-Loading" and search MT6572_Android_scatter.txt in ROM
- Wait file to be added into Flash Tool
- Select "Download Only" or if upgrade "Firmware upgrade"
- Turn off your phone, remove the battery (if the battery is removable) and replace it after some seconds (and don't turn on the phone).

- Press “Download” button to start
- and connect your phone into the computer via USB data cable.
- The process will start and a red progress bar will appear after color purple, yellow.
- And green circles display
- Finish !

- You can now safely disconnect your phone and turn it on.

Bakhshish Mdk

Active Member
Registered ✔
How to Flash Qmobile X200 With Spflash tool?

The requirements of Qmobile X200 is battery backup of 40% to 50%.

  1. Download and install Qmobile X200 Usb Drivers.
  2. Download Stock Rom of Qmobile X200 Firmware Password is qmobile46
  3. Power Off your Mobile and remove Battery.
  4. Download and extract spflash tool.
  5. Now open sp flash tool and specify scatter file from that stock rom.
  6. Now press download button. if face any error change download mode to firmware upgrade.
  7. when Green bar of Ok appears your flashing done.
  8. Now unplug cable and remove battery.
  9. Now insert battery and press power button.
  10. Your flashing is complete enjoy.
  11. if you faced any error copy and paste that error in comments.